Initiation Systems
In Initiation Systems, it all started with the invention of safety fuse and later, the detonator. Then came the introduction of the NONEL® non-electric initiation system. Today, we have a range of detonators that are superior to anything else in the market, including the industry's most advanced electronic initiation systems.
NONEL® LP Series
The NONEL LP detonator is a long period, high strength delay detonator series featuring 19 delays ranging from 25 to 8000 milliseconds. The NONEL LP detonator has the highest explosive output available in commercial detonators and provides increased water hammer resistance in blasting applications where saturated ground conditions exist.
MSDS NONEL® LP
NONEL® MS Series
The NONEL MS detonator is a millisecond, high strength delay detonator series featuring 28 delays ranging from 25 to 1000 milliseconds. The NONEL MS detonator can be used as a starter line or used in conjunction with NONEL Lead Line to initiate blasts.
MSDS NONEL® MS
NONEL® MS Connector
The NONEL MS Connector is a surface delay detonator series featuring 6 standard delays.
MSDS NONEL® MS CONNECTOR
NONEL® Lead Line
NONEL Lead Line is a reel-off NONEL tube system used as a lead-in line where large firing distances are required to provide greater clearance between the firing point and blast.
Please note: NONEL Lead Line is also known as NONEL Extendaline.
MSDS NONEL® LEAD LINE
TROJAN® Spartan® Cast Boosters
TROJAN® SPARTAN Cast Boosters are detonator sensitive, high density, high energy molecular
explosives available in various sizes designed to optimize initiation of all booster sensitive explosives.
Ringprime® Cast Booster
The Ringprime® Cast Booster is a high density, High Detonation Pressure (HDP) booster, cast into a plastic shell. It has a single tunnel and cap well located centrally in the booster.
MSDS Boosters
TDS Ringprime Cast Booster
Doubledet Cast Booster
The Doubledet® Cast Booster is a high density, High Detonation Pressure (HDP) cast booster, incorporating two sets of cap wells to accommodate two NONEL® detonators.
MSDS Boosters
Detonating Cord
Used in combination with NONEL MS Connectors, the Detonating Cord provides a safe, quick and reliable method of initiation. The Primaline® 10 Detonating Cord consists of a cotton core, covered by a continuous core of PETN explosive bound in nylon fibres, a plastic sheath. The Primacord® 5 cord is wrapped in a colour coded high strength synthetic textile. Nominal core loads are 10 g/m and 5 g/m.
MSDS PRIMALINE® 10 DETONATING CORD
MSDS PRIMACORD® 5 DETONATING CORD
Electric Detonators
This is a safe and accurate electric detonator with a strength rating of No. 8. The detonator is of the NPED-type, in which the primary explosive has been replaced with a secondary explosive. This gives increased safety in handling.
MSDS Electric Detonators
TDS Electric Detonator
NONEL® EZTL
The NONEL EZTL Initiation System is a low strength surface detonator series used in conjunction with the NONEL MS Series to provide flexible, easy-to-use surface initiation in mining and construction applications.
MSDS NONEL® EZTL
TDS NONEL EZTL
NONEL® Starter
NONEL® Starter is used as a lead-in line from a safe firing position to the blasting location. A NONEL Starter consists of a length of NONEL tube sealed at one end and a NONEL UB Connector attached at the other end.
MSDS NONEL Starter
TDS NONEL Starter