The products listed here are manufactured in Australia and exported to various locations around the world including Asia, Southeast Asia, Indonesia, Papua New Guinea, China, Japan and Korea. For contact information in any of these regions, please click the links above or at the left.
Initiation Products Bulk Products Packaged Products
Initiation Products4
FireX™ MS
FIREX MS detonator is a millisecond, high strength delay detonator series featuring 28 delays ranging from 25 to 1000 milliseconds. The FIREX MS detonator can be used as a starter line or used in conjunction with FIREX LEADLINE to initiate blasts.
FireX MS
FireX™ LP
FIREX LP detonator is a long period, high strength delay detonator series featuring 19 delays ranging fro 25 to 8000 milliseconds. The FIREX LP detonator has the highest explosive output available in commercial detoantors and provides increased water hammer resistance in blasting applications where saturated ground conditions exist.
FireX LP
FireX™ quickTL
FIREX QUICKTL initiation system is a low strength surface detonator series used in conjunction with the FIREX MS series to provide flexible, easy-to-use surface initiation in mining and construction applications.
FireX QuickTL
FireX™ MS Connector
FIREX MS Connector is a surface delay detonator series designed to provide a millisecond delay for detonating cord initiated blasts. The series features six standard delays.
FireX MS Connector
FireX™ Lead Line
FIREX LEAD LINE is a reel-off FIREX tube system used as a lead-in line where large firing distances are required to provide greater clearance between the firing point and blast.
FireX Lead Line
FireX™ Starter
FIREX STARTER is used as a lead-in line from a safe position to the blasting location. A FIREX STARTER consists of a length of FIREX tube sealed at one end and a FIREX UB connector attached to the other end.
FireX Starter
FireX™ Electric Detonator
FIREX ELECTRIC DETONATOR is a safe and accurate electric detonator with a strength rating of No. 8. The detonator is of the NPED-type, in which the primary explosive has been replaced with a secondary explosive. This gives increased safety in handling.
FireX Electric Detonator
TROJAN™ 150 & 400
The TROJAN cast booster is designed to initiate non-detonator sensitive explosives.
TROJAN 150 & 400
TROJAN™ Ringprime®
TROJAN RINGPRIME cast booster is a high density, High Detonation Pressure (HDP) booster, cast into a plastic shell. It has a single tunnel and cap well located centrally in the booster.
TROJAN Ringprime
FireLine™ T5 & P10
FIRELINE T5 and P10 detonating cords are flexible linear explosives with a core of PETN encased in an outer jacket. FIRELINE T5 detonating cords are encased in a textile jacket and FIRELINE P10 detonating cords are encased in a plastic jacket.
FireLine T5 & P10
Bulk Products 4
ANFO
ANFO is a nominal 94:6 blend of prilled low density ammonium nitrate and diesel fuel oil. It is a dry, free running product, usually coloured for identification.
ANFO
TROJAN™ Prill
TROJAN PRILL is a high quality, low density prilled form of ammonium nitrate.
TROJAN Prill
TROJAN™ 3000 Gassed Blend
TROJAN 3000 gassed emulsion blends are water resistant bulk explosives, designed to be pumped from a bulk delivery truck through a loading hose to the bottom of the blasthole. TROJAN 3000 gassed blends have been developed for small to medium diameter wet hole blasting conditions.
TROJAN 3000 Gassed Blend
TROJAN™ 3000 Heavy ANFO
TROJAN 3000 Heavy ANFO blends are bulk explosives, designed to be augured from a bulk delivery truck. They ahve been developed for dry or dewatered blasting conditions.
TROJAN 3000 Heavy ANFO
TROJAN™ 4000 Gassed Blend
TROJAN 4000 gassed emulsion blends are water resistant bulk explosives, designed to be pumped from a delivery truck through a loading hose to the bottom of the blasthole. TROJAN 4000 gassed blends have been developed for medium to large diameter wet hole blasting conditions.
TROJAN 4000 Gassed Blend
TROJAN™ 4000 Heavy ANFO
TROJAN 4000 Heavy ANFO blends have varying degrees of water resistance and have been designed to be augured or pumped into dry or dewatered blastholes. The TROJAN 4000 Heavy ANFO blends have been developed for dewatered medium to large diameter hole blasting conditions.
TROJAN 4000 Heavy ANFO
TROJAN™ 4000(Intn'l) Gassed Blend
TROJAN 4000int gassed emulsion blends are water resistant bulk ANFO/emulsion explosive blends designed to be pumped from a bulk delivery truck through a loading hose lowered to the bottom of the blasthole.
TROJAN 4000(Intl) Gassed Blend
TROJAN™ 6100
TROJAN 6100 gassed emulsion is water resistant and designed to be pumped from a bulk underground delivery truck. The TROJAN 6100 system uses the specialized 'charging vehicle' for applications in up and down-holes. The truck is equipped with a dedicated boom and patented hose retraction unit.
TROJAN 6100
Packaged Products 4
ANFO (Bagged)
ANFO is a nominal 94:6 blend of prilled low density ammonium nitrate and diesel fuel oil. It is a dry, free running product, usually coloured for identification.
ANFO (Bagged)
ANFO PS
ANFO PS is a low density form of ANFO specially developed for use where light explosive charging is required. ANFO PS is a 50:50 volume blend of ANFO to polystyrene.
ANFO PS
Powermite® Pro
POWERMITE PRO is an enhanced cartridged emulsion product containing a significantly improved formulation to deliver superior power, rigidity and operations.
Powermite Pro
TROJAN™ Split
TROJAN SPLIT explosive is a high strength watergel explosive produced in a continuous cartridged form used as a pre-split product.
TROJAN Split
TROJAN™ ANFO PS
TROJAN ANFO PS is a low density explosive formulated for use in underground blasting designed to overcome segregation problems during loose pouring and pneumatic loading of explosive product.
TROJAN ANFO PS
Z-Bar® Edge & Z-Bar® Lifter
Z-BAR is a contour product designed to deliver the perfect solution for precision floor blasting in wet or dry underground developments. Z-BAR EDGE is used for perimeter blasting in underground development rounds. Z-BAR LIFTER is suited to development blasting where the ground is wet and suited to a high heave product.
Z-Bar Edge
Z-Bar Lifter