Bulk Products
Where larger quantities of explosives are required, bulk loading saves time, saves labor and improves explosives performance. Dyno Nobel America pioneered most of the bulk loading technology that is in use around the globe today and continues to lead the indusutry in bulk explosives technology.
Note: To view the links below, you will need to turn off any pop-up blocker operating on your computer.
Titan Dyno Gold Site Mixed System
TITAN® 4
Titan Product Brochure.pdf
Titan® 1000
TITAN 1000 is an unsensitized, repumpable, bulk emulsion matrix specifically formulated for augered mixing with bulk ANFO to manufacture Titan 1000 Heavy ANFO blends. Titan 1000 Heavy ANFO blends with 50% or less emulsion are booster sensitive and provide excellent blasting performance in surface blasting applications where boreholes are dry or dewatered before loading. The emulsion percentage of Titan 1000 Heavy ANFO blends can vary from 5% to 50% to best match specific blasting requirements. Refer to the data table at left for the physical properties of typical Titan 1000 Heavy ANFO blends.
Titan_1000.pdf
Titan 1000 MSDS #1052.pdf
Titan 1000 MSDS #1052 French.pdf
Titan® XL 1000
TITAN XL 1000 is a gassed, bulk emulsion made from TITAN 1000 or TITAN 1000 G specifically designed for quarry and open pit mining operations. Transported as an oxidizer, TITAN XL 1000 is formulated to be sensitized during the borehole loading process using Dyno Nobel's innovative chemical gassing and emulsion processing technology. The process used to manufacture TITAN XL 1000 enhances water resistance and detonation performance while improving loading characteristics. Chemical gassing allows the average density of TITAN XL 1000 to be varied as required to optimize its explosive performance for best blast results.
Titan_XL_1000.pdf TITAN_XL_1000_FR.pdf Titan Bulk Brochure.pdf
Titan XL 1000 MSDS #1052.pdf
Titan XL 1000 Bulk Emulsion MSDS #1052 (French).pdf
Titan® 1000 G
TITAN 1000 G is an unsensitized bulk emulsion matrix specifically formulated to be sensitized during loading at the borehole using Dyno Nobel chemical gassing technology. Titan 1000 G, Dyno Nobel’s high performance, booster sensitive emulsion explosive can be used alone in 2-1/2 in (65 mm) and larger boreholes or in larger boreholes when used in an emulsion/ANFO blend.
Chemical gassing can vary the density from 1.10 and 1.30 g/cc. In addition, the percentage of Titan 1000 G can vary to deliver explosive performance that best
matches specific blasting requirements. Refer to the data table at left for the physical
properties and loading methods for some typical Titan 1000 G emulsion/ANFO
explosive blends.
Titan_1000-G.pdf Titan_1000-G French.pdf
Titan 1000 G MSDS #1052.pdf
Titan 1000G Bulk Emulsion MSDS #1052 (French).pdf
Titan® 1000 LD
TITAN 1000 LD is a booster sensitive, high performance, economical, repumpable bulk emulsion explosive specifically formulated to provide superior blasting performance in nearly all open pit applications where large diameter boreholes are used. Titan 1000 LD can be used alone, blended with up to 45% ANFO for direct pumping to the bottom of water-filled boreholes or as the emulsion explosive component for augerable Heavy ANFO blends. The percentage of emulsion in Titan 1000 LD Heavy ANFO blends can be varied to best match specific blasting requirements.
Titan_1000-LD.pdf Titan_1000-LD French.pdf
Titan 1000 LD Bulk Emulsion MSDS # 1062.pdf
Titan 1000 LD Bulk Emulsions MSDS #1062 (French).pdf
Titan® 1000 SD
TITAN 1000 SD is a booster sensitive, high performance, repumpable bulk emulsion explosive specifically formulated to provide superior blasting performance in all open pit and quarry applications where 3 in (75 mm) and larger diameter boreholes are used. Titan 1000 SD can be used alone, blended with up to 45% ANFO for direct pumping to the bottom of water-filled boreholes; or as the emulsion explosive component for augerable Heavy ANFO blends. The percentage of emulsion in Titan 1000 SD emulsion/ANFO or Titan 1000 SD Heavy ANFO blends can be varied to best match specific blasting requirements. Refer to the data table at left for the physical properties
of some typical Titan 1000 SD blends.
Titan 1000 SD.pdf
Titan 1000 SD BulkbEmulsion MSDS #1062.pdf
Titan 1000 SD Bulk Emulsions MSDS #1062 (French).pdf
TITAN® SME
TITAN SME (SITE MIXED EMULSION) is a gassed, bulk emulsion made on the bench and designed for quarry and open pit mining operations. Transported as an oxidizer, TITAN SME is formulated to be sensitized during the borehole loading process using Dyno Nobel's innovative chemical gassing and emulsion technology. The process used to manufacture TITAN SME enhances water resistance and detonation performance while improving loading characteristics. Chemical gassing allows the average density ot TITAN SME to be varied as required for geological conditions to optimize its explosive performance to achieve best blast results.
TITAN SME.pdf TITAN SME MSDS #1052.pdf Titan Bulk Brochure.pdf
TITAN® 7000 RU
Reduces Mining Costs
No other bulk underground emulsion can compare with TITAN 7000 RU’s ability to improve fragmentation and reduce drilling costs. Standard patterns can be drilled and loaded with a single product regardless of whether the holes are wet or dry.
Fast, Easy Loading
TITAN 7000 RU loads faster than traditional explosives in boreholes 1.75 inches in diameter and larger. Using Dyno Nobel loading equipment, 7000 RU maximizes loading density and borehole coupling to achieve cost effective results, especially in upholes.
Lower Nitrate Levels
TITAN 7000 RU performs consistently and detonates completely to reduce the amount of nitrates in the groundwater.
Sulfide Ore Compatible
Dyno RU SX is specially formulated for use in underground operations where sulfide reactivity and secondary dust explosions are potential hazards.
TITAN 7000 RU.pdf TITAN_7000 RU (French) .pdf Titan Bulk Brochure.pdf
Dyno_RU.pdf
Dyno_RU (French).pdf
Titan 7000 RU+ Dyno RU Bulk Emulsions.pdf
Dyno RU Bulk Emulsions MSDS # 1062 (French).pdf
TITAN® 7000 RU-A
TITAN 7000 RU-A is a booster sensitive, high performance, repumpable bulk emulsion explosive designed specifically for use in underground construction, quarry and mining operations where contact is likely with concrete or shotcrete used for ground support. TITAN 7000 RU-A also applies in situations where pH basic ore and/or basic water conditions exist or where fumes of ammonia are problematic. TITAN 7000 RU-A is specifically applicable in shaft sinking, tunneling, drift and raise development, room and pillar, mechanized cut and fill, vertical crater retreat, uppers retreat, bench and block cave mining methods.
TITAN 7000 RU-A.pdf
TITAN 7000_RU-A (French).pdf
Dyno_RU-A.pdf
Dyno_RU-A (French).pdf
Titan 7000 RU-A + Dyno RU-A Bulk EmulsionsMSDS #1062.pdf
Dyno RU-A Bulk Emulsions MSDS #1062 (French).pdf
TITAN® 7000 RU-SX
TITAN 7000 RU-SX is a booster sensitive, high performance repumpable, bulk emulsion designed specifically for use in underground mining operations in which sulfide ore reactivity and secondary dust explosions are potential hazards. Dyno Nobel proprietary technology minimizes the risks of using bulk explosives in these sulfide ore environments.
TITAN 7000 RU-SX.pdf
TITAN 7000_RU-SX (French).pdf
Dyno_RU-SX.pdf
Dyno_RU-SX (French).pdf
Titan 7000 RU-SX + Dyno RU-SX Bulk Emulsion MSDS #1062.pdf
Dyo RU-SX Bulk Emulsions MSDS #1062 (French).pdf
FRAGMAX®
FRAGMAX is a high energy, cast booster sensitive, dry blasting agent designed (photo above shows Ammonium Nitrate Prills on left with Fragmax Prills to the right) for use in dry bore hole conditions in surface (quarry, mining, construction) blasting applications when primed with either nitroglycerin dynamite or a cast booster. Because of higher density and velocity of detonation, FRAGMAX provides greater bulk strength than DYNOMIXTM / ANFO enabling the user to benefit from improved fragmentation and/or expanded patterns. For bulk delivery, FRAGMAX can be premixed and delivered to overhead storage bins, mixed on-site with stationary equipment and loaded into blast hole delivery trucks or mixed as it is loaded down-the-hole with specialized mobile equipment.
FRAGMAX MSDS # 1009 ANFO_Fragmax.pdf MSDS # 1009 ANFO Fragmax French.pdf
Dyno® RUS/RUSC/1136
DYNO RUS and 1136 are booster sensitive, high performance, repumpable bulk emulsion explosives designed specifically for use in underground construction, quarry and mining operations. Applications include: horizontal headings, vertical crater retreat (VCR), benching, room and pillar and block caving. DYNO RUSC is designed for surface quarry, mining and construction use.
Dyno_RUS-RUSC-1136.pdf
Dyno_RUS-RUSC-1136 (French).pdf
Dyno RUS-RUSC-1135 Bulk Emulsion MSDS #1062.pdf
Dyno RUS-RUSC-1136 Bulk Emulsions MSDS #1062 (French).pdf
Dyno Gold® 4
Dyno Gold®
Reduces Drill and Blast Costs
When blended with at least 50% ANFO, Dyno Gold forms a booster sensitive explosive that can be customized at the borehole to produce a range of energies and densities. These blends can be adjusted to provide optimum bulk strength and detonation velocity to achieve expanded patterns and increased productivity.
Versatile
High energy and density enables Dyno Gold blends to be used as a bottom load or as a full column load in tough blasting conditions.
Safe to Store and Transport
Dyno Gold is a 5.1 oxidizing liquid. As a result, transportation and storage are less hazardous.
Dyno_Gold_C.pdf
Dyno Gold C MSDS #1052.pdf
Dyno Gold C Bulk Emulsion MSDS #1052 (French).pdf
Dyno Gold® Lite
Originators of Gassed Emulsion
With nearly 20 years of experience, Dyno Nobel is the world leader in gassed emulsion technology.
Optimize Blasting Results
When gassed and/or blended with ANFO at the borehole, Dyno Gold Lite becomes a high bulk strength, booster sensitive explosive formulated for boreholes 2.5 inches in diameter and larger. In addition to customizing the blend with ANFO, the natural benefit of gassing, due to pressure differentials, is high density at the bottom of the borehole with less density higher in the column.
Safe to Store and Transport
Dyno Gold Lite is a 5.1 oxidizing liquid. As a result, transportation and storage are less hazardous.
Dyno_Gold_C-Lite.pdf
Dyno_Gold_Lite.pdf
Dyno_Gold_Lite (French).pdf
Dyno Gold C Lite MSDS # 1052.pdf
Dyno Gold C Lite Bulk Emulsion MSDS #1052 (French).pdf
Dyno Gold® LD
Cost Effective for Large Diameter Holes
Dyno Gold LD is a patented, booster sensitive emulsion formulated with plastic microballons for density control. This advanced technology provides higher energies and velocities for more cost effective blasting in open pit mining where boreholes are 4.5 inches in diameter or larger.
Adjustable Performance
Dyno Gold LD can be customized at the borehole by adding ANFO to provide optimum bulk strength and detonation velocity for expanded patterns, improved fragmentation and reduced mining costs.
Water Resistant
Pumpable blends have excellent water resistance when loaded through the hose to the bottom of the borehole. Augerable blends diminish in water resistance as the percentage of emulsion decreases.
Dyno_Gold_C-LD.pdf
Dyno Gold LD Bulk Emulsion MSDS # 1062.pdf
Dyno Gold LD Bulk Emulsions MSDS #1062 (French).pdf
Dyno Gold® SD
Cost Effective for Small Diameter Holes
Dyno Gold SD is a patented, booster sensitive emulsion formulated with plastic microballons for density control. This advanced technology provides higher energies and velocities for more cost effective blasting in open pit mining where boreholes are 3 to 4 inches in diameter.
Adjustable Performance
Dyno Gold SD can be customized at the borehole with up to 30% ANFO to provide optimum bulk strength and detonation velocity for expanded patterns, improved fragmentation and reduced mining costs.
Water Resistant
Dyno Gold SD and Dyno Gold SD blends have excellent water resistance when loaded through the hose to the bottom of the borehole.
Dyno_Gold_C-SD.pdf
Dyno_Gold_SD.pdf
Dyno_Gold_SD (French).pdf
Dyno Gold SD Bulk Emulsions MSDS #1062.pdf
Dyno Gold SD Bulk Emulsions MSDS #1062 (French).pdf
Site Mixed System® 4
Site Mixed System™
The SMS Advantage
Specially designed trucks safely carry inert ingredients in separate compartments to the blast site where these components are mixed and pumped into the borehole to become detonable for the first time. No significant amount of explosive product ever exists in the delivery system.
Best in Wet Boreholes
The high viscosity of Dyno Nobel’s SMS products effectively displace water with a continuous column of explosives. In addition, excellent water resistance allows extended borehole sleep times.
Variable Energy and Density
The versatile Site Mixed System manufactures and delivers a booster sensitive explosive with a wide range of energies and densities to optimize explosive coupling and maximize energy transferred to the rock.
SMS.pdf
SMS (French).pdf
SMS Bulk Emulsion MSDS #1052.pdf