AustraliaAmerica
Dyno Nobel Transportation, Inc.dnx Drilling, Inc.Products
Blast AccessoriesBulk ExplosivesCast BoostersDelivery SystemsDetonating CordsDetonatorsDynamiteNitrogen ProductsOil Field ExplosivesPackaged ExplosivesPresplit Explosives
Seismic Explosives
ServicesDYNOx™Technical Information / MSDS
Asia & Southeast Asia (including Indonesia & PNG)CanadaChina, Japan & KoreaEurope, Africa & Middle EastMexico & Central AmericaSouth AmericaRussiaExport Products (dnx)

Presplit Explosives

Note:  To view the links below, you will need to turn off any pop-up blocker active on your computer.

Dynosplit® D

Easy to Assemble Rigid Cartridges

Rigid cartridges are assembled using plastic connectors to make loading continuous lengths easier, especially in difficult conditions.

History of Reliability

Generations of blasters have proven the unsurpassed reliability of dynamite. Dynosplit will shoot an air gap of up to 20" which makes it the most effective explosive on the market for surface presplitting and underground smooth wall blasting. Dynosplit presplits with uniform energy distribution throughout the column and low detonation pressure to minimize overbreak.

Dynosplit.pdf                                         Dynosplit (French).pdf

Dynosplit MSDS #1019                          Dynosplit MSDS #1019 (French).pdf

Dynosplit® E

Flexible and Easy to Load

The continuous length of Dynosplit E enables a single person to load a pre-shear blast. In addition, this cut-to-fit product comes to the job ready to use. No detonating cord, tape, couplers or make-up labor is required.

Reliable Performance

The full length detonating cord on the inside of the package, embedded in explosive, ensures a reliable, uniform shearing effect throughout the powder column to the highest degree allowed by local geology. Dynosplit E can be initiated with either a detonator or other detonating cord.  Dynosplit presplits with low detonation pressure to minimize overbreak.

Dynosplit_E.pdf

Dynosplit_E (French).pdf

Dynosplit E MSDS #1117                 Dynosplit E MSDS # 1117 (French).pdf

Dynosplit® AP

Cordless

Dynosplit AP does not utilize either an internal or attached external detonating cord trace, making it an all-purpose, water resistant, cost effective emulsion product for this underground perimeter control applications.

Consistent Pressure

Dynosplit AP is one continuous single cartridge.  This continuous explosive column provides consistent borehole pressure along the entire loaded borehole zone resulting in a uniform tensile shearing effect.  Dynosplit AP can be ordered in a standard length so that cutting is not needed, making this product very easy to handle.

Dynosplit_AP.pdf                                                 Dynosplit AP MSDS #1030 (French).pdf                                  

Dynosplit AP MSDS #1030